1 Industrial chemicals, namely, refrigerants gas for mobile, stationary, heat pumps and industrial air conditioning systems; [ Heat carrier preparations, namely, polyethylene glycol, propylene glycol, biphenyl (C12H10), diphenyl oxide (C12H10O), di- and tri-aryl ethers, alkylated aromatics, diphenylethane, partially hydrogenated terphenyls, dibenzyl toluene, C14-C30 alkyl benzenes, ester-based fluids; ] Gas propellants for aerosol containers; Aromatic Solvents, namely, Mono- and Dimethylamine for industrial and commercial use; Power transmission fluids; Salt Brines and stablizing liquids for controlling high and low temperature heat transfer for industrial use; Chemical products, namely, aluminum silicate for use in foundry sand; Zircon aluminum silicate used as a molding sand for the fabrication of castings in foundries and refractories; Titanium dioxide for industrial purposes; Chemical preparations, namely, resinous additives for use in the manufacture of paint, paint pigment, enamel and varnishes; Foundry sand; Sodium chlorite for use in the mechanical generation of chlorine dioxide; [ Sodium cyanide for industrial use; Chemically blended ethanol additives, namely, Ethanol production process aid for use in the fermentation process in wineries and breweries and for the use in the prevention and control of disease in animals and agriculture, namely, ammonia and saccharification enzymes, and bacterial xylose isomerases; ] High purity glycolic acid used in the manufacture of cosmetic and cleaning preparations and as a chemical reagent for scientific or research use; [ Chlorofluorocarbons not including chemicals for use in the manufacture of pharmaceuticals or pharmaceutical products; ] Inorganic acids for chemical preparations, Ion-exchange resins; Catalysts, namely, mono-, di-, and trimethylamine for use in the manufacture of other industrial catalytic chemicals; [ Nonchlorine chemical oxidizer used in a variety of commercial water treatment cleaning applications, namely, shock treatment of spas and swimming pools; Monopersulfate oxidizing compounds for use in industrial and chemical cleaning applications, namely, odor control in wastewater treatment; Industrial Chemical compounds used as an antistatic additive for petroleum products; ] Chemical stone sealers that penetrate the stone to provide sealing protection; [ Stabilized chlorine dioxide solutions for use in the manufacture of industrial antiseptics, disinfectants, odor eliminators, bactericides, anticorrosives, slimicides, not for medical purposes, all for use by food processing plants, dairies, ice plants, oil well drilling operations, water treatments equipment, cooling towers, industrial exhaust systems, potato piling, storage and paper mills; Stabilized chlorine dioxide chemical solutions for use in purification of water, namely, water purifier bleaching and oxidizing agents for use by food processing plants, dairies, ice plants, oil well drilling operations, water treatments equipment, cooling towers, industrial exhaust systems, potato piling, storage and paper mills; ] Chemicals for use in the extraction of precious metals from ores and for the recovery of non-ferrous metals from non-ferrous dross; Industrial Chemical products used in mining operations for metal mining; Organic acids and their salts, namely, glycolic acid, perfluorooctanoic acid, chlorosulfonic acid, sulfuric acid, acetic acid; Cellulose esters for industrial purposes, namely, cellulose acetate, nitrocellulose; Chemical Bonding agents and adhesives used for application to glass fibers used in reinforced plastic laminates and for adhesive bonds between other hydrophilic surfaces such as paper and wood; Polymeric coatings and impregnants for use in the manufacture of paints and varnishes; Fluorochemical surface active agents for the manufacture of fluoropolymers in the industrial and commercial industries; Fluoroalkyl esters; Chemical compounds, namely, paper fluoridizers and surfactants for reducing the surface tension of aqueous solutions; Fluorinated hydrocarbon gas for the manufacture of refrigerants and high performance elastomer seals; Synthetic resinous chemical preparations, namely, non-stick coatings for cookware and kitchen utensils, namely, synthetic resin adhesives for laminating purposes, unprocessed synthetic resins; Fluorochemical surface active agents for use in manufacture of fluoropolymers in the industrial and commercial industries; Unprocessed synthetic resins for chemical preparations; Unprocessed Plastics and unprocessed plastics in the form of powders, granules, liquids, and dispersions for industrial use; Unprocessed perfluoropolymer resin; unprocessed Polyester resin, unprocessed Polyethylene resin and unprocessed Fluorine resins all for industrial and commercial use; Unprocessed fluorine-containing polymers for industrial and commercial use; Synthetic organic dispersions in aqueous form for environmental dust control for use onunsealed roads and open areas; [ Chemical intermediates for use in products for protecting, waterproofing and fireproofing textiles, leather, paper and building exteriors; Chemical intermediates used in the manufacture of wetting agents for use in pesticides, cleaning and polishing agents, paints, inks, waxes and polishes; ] Halocarbon blowing agents, namely, compounds containing halogens such as chlorine and fluorine, for use in the manufacture of plastic foam sheet for food packaging applications, none of the aforesaid goods containing formaldehyde; Active Chemical and fluorinated compounds and unprocessed fluorinated resin preparations for use in protecting fabric; [ Tanning agents for protection of leather for use in the manufacture of leather; Tanning agents for protection of other substrates, namely, animals hides; Oils for currying leather used in the manufacture of leather; Leather-waterproofing chemical used for the protection of leather; Leather-mending chemicals used for the repair and protection of leather, namely, chemicals that reduce wrinkles and increase tear resistance; Leather-renovating chemicals used for the repair and protection of leather, namely, tanning agents such as glycolic acid and alpha hydroxyl acids for use in tanning leather; Leather-renovating chemicals for protection of various substrates, namely, fur and leather; Organic fluoride, namely, ammonium fluoride, calcium fluoride, cerium fluoride, magnesium fluoride and sodium fluoride, for use in surfactants, leveling agents, binding agents for industrial use, excluding those intended for use in pharmaceutical products; ] Chemical compound in the nature of a textile finish with oil, water and stain repellent characteristics for use with textiles; [ Chemical preparations for soil-stabilizing and wrinkle-resisting; ] Chrome complexes in the form of chemical compounds for use in the treatment of paper, textiles of natural and synthetic fibers, leather, asbestos, glass fabrics, particularly to impart water repellency, to improve wax adhesion, to act as sizing agents and to impart to leather lubricating and softening properties which are not adversely affected by ordinary dry cleaning solvents; Unprocessed synthetic resinous fluorine-containing polymers in the form of moulding and extruding compositions, sulphur, kaolin, potash, glue, synthetic resin; Mould-releasing preparations; Catalyst chemicals for use in the manufacture of synthetic materials; Polymerization catalysts and initiators for use in the manufacture of synthetic resinous materials but not including any such goods for use in the pharmaceutical industry; Fluorocarbon chemical preparations for use as release agents and as friction reducing agents for machinery, o-rings, seals, valves for industrial use; fluorosurfactants for industrial use and food contact packaging for use in the field of oil and grease resistant coatings; Leather-dressing chemicals; industrial cleaning and finishing agents used in the manufacture of metal, plastic, glass and textile materials
Trademark: 86268229
