Color is not claimed as a feature of the mark.
The mark consists of the product configuration of a fuel meter for a fuel dispensing pump, where the fuel meter includes: a substantially cube-shaped main body with slightly rounded cast surfaces, rounded corners and a matte finish on cast surfaces, the main body having a top flange, four sides, a flanged bottom, and four cast cylindrical projections extending from the four respective sides of the main body for housing internal cylinders and pistons, each cylindrical projection having a flange for receiving a side cover, each side cover having an outer perimeter with a shape corresponding to the flange of the corresponding cylindrical projection to which it is mounted, each side cover having a protrusion that is shaped as a truncated circle with an upward extension from the truncated edge of the circle, each protrusion having rounded edges; and a decorative top cover design having a generally cylindrical shape and a bottom flange shaped to correspond to the top flange of the main body, the cover having six raised bosses on an otherwise generally flat top surface, a disk centrally provided in the top surface of the top cover and having a central hole and three equally spaced holes around the central hole, the top cover further having an open outlet port extending from one side thereof where the outer bounds of the output port is shaped like a diamond with rounded corners, the outlet port opening is circular and where the outlet port includes two apertures for receiving bolts. Optional pairs of ribs protruding from the sides of the cover and from the flange on either side of holes in the flange for bolts that fasten the top cover to the main body is shown in dashed lines and does not form a part of the mark. An optional decorative brass pin extending from the central hole in the disk of the top cover for securing a calibration wheel is shown in dashed lines and does not form a part of the mark. Optional letters "B" that are stamped within the truncated circles of the side cover protrusions are shown in dashed lines and do not form a part of the mark.
Trademark: 86237020
