Trademark: 77893614
Status Date
Monday, January 18, 2021
Registration Number
4556134
Registration Date
Tuesday, June 24, 2014
Filing Date
Tuesday, December 15, 2009
Published for Opposition
Tuesday, January 10, 2012
Cancellation Date
Monday, January 18, 2021
6 Metal industrial hardware and fasteners, namely, bolts, nuts, anchors, lock nuts, metal welding rods and metal threaded rods, metal brackets for general use, clamps, metal clamp-type fasteners, namely, adjustable diameter metal clamps for stationary binding of hoses, wires and tubes, door handles, snap catches and metal cabinet door catches, quarter turn screws that lock after a quarter turn, locks, latches, hinges; metal door and toolbox hardware, namely, hasps; metal hardware for use in vehicles, namely, grease fittings; structural fasteners, namely, insert fasteners for sandwich structures; metal self-tapping bushings, metal strain relief bushings for wire and cable; metal hardware, namely, grommets and washers; woodruff keys and machine keys, metal knobs, metal locking knob springs, nails; metal pins, namely, metal cotter pins, metal dowel pins, metal hitch pins, metal coiled spring pins, metal clevis pins and metal groove pins; metal plug buttons for screw holes, metal plugs; metal hardware, namely, snap rings; metal rivets, metal rivet caps for split and tubular rivets; metal screws, metal screw anchors; metal shims, metal spacer brackets; metal hardware, namely, springs; metal bolt snaps; metal hooks; wire rope fittings of metal, namely, metal threaded studs; metal fasteners, namely, stand-offs; metal upholstery tacks, snap hooks and buttons; metal threaded fasteners, namely, double-sided threaded bolts; cable thimbles of metal; metal washers for distributing fastener load, wire; cast materials, namely, continuous cast steel rounds; retractable metal folding individual steps for securement to a vertical surface. metal sealing, gasket and key rings, metal handles for doors and cabinets; metal marine hardware, namely, buckles, dock cleats, hooks, metal fastening rings, metal snap fasteners and press-studs having a pair of interlocking discs; metal upholstery and furniture hardware and supplies, namely, metal snap fasteners and press-studs having a pair of interlocking discs, metal fastening rings, metal upholstery tacks, drawer and chair glides, chair swivel plates, metal hooks; buckles of common metal; metal furniture parts, namely, drawer and chair slides; storage containers, namely, general purpose metal storage bins; truck and trailer refrigeration hardware, namely, metal refrigerator locks; metal hollow wall and solid wall fastening anchors
8 hand tools, namely, pop riveters; hand tools, namely, nut and screw drivers and interchangeable nut and screw head bits therefor; pliers; hand operated cutting tools; hand tools, namely, hex key wrenches and hex key wrench sets comprising multiple hex key wrenches of different sizes; hand tools, namely, nut drivers; hand operated pry bars for removal of speed nuts; hand operated tools for the insertion of speed nuts; hand tools, namely, punches; hand operated retaining ring applicators; hand tools, namely, retaining ring pliers; hand operated clamping tools for joining banded material, such as metal strapping, together; clamping bushings; locking cable tie tools, namely, pliers and cutters; wiring terminal tools, namely, crimpers, wire cutters, pliers and wire strippers; hand operated tools for positioning weatherstripping materials within channels; hand operated grommet tools for inserting and connecting grommets into sheet materials of fabric, canvas and vinyl; hand tools, namely, grommet dies and hole punches; hand operated staple removers; chisels; hand tools, namely, hand tools for removing tacks; hand operated upholstery spring benders and webbing stretchers; shears; hand operated cutting tools, namely, wire cutters, sheet metal cutters and bolt cutters; scissors; hand tools, namely, awls; hand tools, namely, cushion clip pliers; hand tools, namely, hammers; split ring pliers; hand tools, namely, drills; hand tools, namely, tap and die sets; manually operated pneumatic grease gun accessories, namely, grease fittings; hand tools, namely, hex key wrenches and allen wrenches; hand tools, namely, gib-head wrenches for holding pulleys and gears tightly on a shaft
9 magnets; electrical hardware, namely, electrical terminal blocks, electrical connectors, electrical connector housings; calipers, namely, pocket calipers and slide calipers for measuring; feeler gauges for measuring the thickness of gaps between industrial materials and thread pitch gauges for measuring the size of threads on industrial fasteners; and ring sizers
17 adhesive tape for industrial and commercial use; rubber anti-vibration pads; plastic and rubber caps for industrial containers; sealing plugs made primarily from rubber; molded rubber bumpers used as non-skid friction devices which act as pads, cushions or shock absorbers for chair legs, doors and drawers; rubber grommets for insulation and shock absorption not for use with vehicles; rubber bottle stoppers; extruded semi-finished goods made of synthetic materials in the form of hoses and seals for industrial, construction and agricultural use; plastic, silicone and rubber weatherstripping for use in automobiles, air hoses, buildings and homes; non-metal seals, namely, o-rings for use with fluid power and industrial applications; rubber sealing plugs, namely, rubber plug bumpers for holes
20 plastic caps and plastic dowel plugs for plugging holes; plastic storage containers, namely, storage cabinets, storage drawers, storage racks, and cabinets for holding first aid supplies; non-metal fasteners, namely, rivets; non-metal screws and plastic fastening screw anchors; non-metal shims; non-metal furniture parts, namely, drawer and chair glides; non-metal upholstery tacks; non-metal fastening anchors; plastic, silicone and rubber door trims, drawer trims and window trims; rubber tips for furniture and stool legs; plastic suction cups not for medical purposes; non-metal hollow wall and solid wall fastening anchors; plastic, silicone and rubber lawn and landscaping edging; plastic knobs
Jan 19, 2021
Notice Of Cancellation Sec. 8 Emailed
Jan 18, 2021
Cancelled Sec. 8 (6-Yr)
Jul 8, 2020
Post Registration Action Mailed - Sec. 8 & 15
Jul 8, 2020
Case Assigned To Post Registration Paralegal
Jun 24, 2020
Teas Section 8 & 15 Received
Jun 19, 2020
Review Of Correspondence Complete - Address Updated
May 25, 2020
Applicant/Correspondence Changes (Non-Responsive) Entered
May 25, 2020
Teas Change Of Correspondence Received
May 25, 2020
Teas Change Of Domestic Representatives Address
May 25, 2020
Teas Withdrawal Of Attorney Received-Firm Retains
May 25, 2020
Attorney/Dom.Rep.Revoked And/Or Appointed
May 25, 2020
Teas Revoke/App/Change Addr Of Atty/Dom Rep Received
May 25, 2020
Teas Change Of Owner Address Received
Jun 24, 2019
Courtesy Reminder - Sec. 8 (6-Yr) E-Mailed
Jun 24, 2014
Registered-Principal Register
May 20, 2014
Notice Of Acceptance Of Statement Of Use E-Mailed
May 19, 2014
Law Office Registration Review Completed
May 15, 2014
Allowed Principal Register - Sou Accepted
Apr 18, 2014
Examiner's Amendment Entered
Apr 18, 2014
Notification Of Examiners Amendment E-Mailed
Apr 18, 2014
Examiners Amendment E-Mailed
Apr 18, 2014
Su-Examiner's Amendment Written
Apr 14, 2014
Notice Of Revival - E-Mailed
Apr 14, 2014
Teas/Email Correspondence Entered
Apr 14, 2014
Correspondence Received In Law Office
Apr 14, 2014
Petition Granted - Response Received
Apr 10, 2014
Teas Response To Petition Deficiency Received
Apr 10, 2014
Incomplete Petition Notice Mailed
Apr 9, 2014
Teas Response To Petition Deficiency Received
Mar 11, 2014
Incomplete Petition Notice Mailed
Mar 11, 2014
Assigned To Petition Staff
Mar 10, 2014
Teas Due Diligence Petition Received
Dec 31, 2013
Abandonment Notice Mailed - Failure To Respond
Dec 31, 2013
Abandonment - Failure To Respond Or Late Response
Apr 18, 2013
Notification Of Non-Final Action E-Mailed
Apr 18, 2013
Non-Final Action E-Mailed
Apr 18, 2013
Su - Non-Final Action - Written
Mar 27, 2013
Statement Of Use Processing Complete
Mar 6, 2013
Use Amendment Filed
Mar 26, 2013
Case Assigned To Intent To Use Paralegal
Mar 6, 2013
Teas Statement Of Use Received
Dec 8, 2012
Notice Of Approval Of Extension Request E-Mailed
Dec 7, 2012
Extension 1 Granted
Sep 6, 2012
Extension 1 Filed
Dec 6, 2012
Case Assigned To Intent To Use Paralegal
Dec 5, 2012
Notice Of Revival - E-Mailed
Dec 5, 2012
Extension Received With Teas Petition
Dec 5, 2012
Petition To Revive-Granted
Dec 5, 2012
Teas Petition To Revive Received
Oct 9, 2012
Abandonment Notice Mailed - No Use Statement Filed
Oct 8, 2012
Abandonment - No Use Statement Filed
Mar 6, 2012
Noa E-Mailed - Sou Required From Applicant
Jan 10, 2012
Official Gazette Publication Confirmation E-Mailed
Jan 10, 2012
Published For Opposition
Dec 21, 2011
Notification Of Notice Of Publication E-Mailed
Dec 6, 2011
Law Office Publication Review Completed
Dec 6, 2011
Approved For Pub - Principal Register
Nov 16, 2011
Teas/Email Correspondence Entered
Nov 16, 2011
Correspondence Received In Law Office
Nov 3, 2011
Teas Request For Reconsideration Received
Jun 3, 2011
Notification Of Final Refusal Emailed
Jun 3, 2011
Final Refusal E-Mailed
Jun 3, 2011
Final Refusal Written
May 7, 2011
Teas/Email Correspondence Entered
May 6, 2011
Correspondence Received In Law Office
May 6, 2011
Teas Response To Office Action Received
Jan 20, 2011
Teas Change Of Correspondence Received
Nov 6, 2010
Notification Of Non-Final Action E-Mailed
Nov 6, 2010
Non-Final Action E-Mailed
Nov 6, 2010
Non-Final Action Written
Sep 24, 2010
Teas/Email Correspondence Entered
Sep 23, 2010
Correspondence Received In Law Office
Sep 24, 2010
Teas/Email Correspondence Entered
Sep 24, 2010
Correspondence Received In Law Office
Sep 23, 2010
Teas Response To Office Action Received
Sep 22, 2010
Applicant/Correspondence Changes (Non-Responsive) Entered
Sep 22, 2010
Assigned To Lie
Sep 9, 2010
Paper Received
Mar 23, 2010
Notification Of Non-Final Action E-Mailed
Mar 23, 2010
Non-Final Action E-Mailed
Mar 23, 2010
Non-Final Action Written
Mar 16, 2010
Assigned To Examiner
Dec 23, 2009
New Application Office Supplied Data Entered In Tram
Dec 18, 2009
New Application Entered In Tram
Trademark Alertz updated from USPTO on 2030-01-24
